KNX Switching Actuator, 8-gang 16 A/ blind actuator, 4-gang 16 A with manual actuation

Depending on the parameterisation, the actuator can be used as a switching actuator or a blind actuator. Mixed configurations of switching and blind actuators are also possible. For the blind actuator function, two neighbouring relay outputs are combined to form one blind output.

Technical data

KNX medium:TP1-256
Power supply:AC 230 V, 50/60 Hz
Switching capacity AC 230 V:16 A / AC1
Switching capacity AC 230 V:16 AX
Maximum switch-on current:800 A, 200 µs, 165 A, 20 ms
Connected load
Ohmic load:3000 W
Capacitive load AC 230 V:16 A, max. 140 µF
Motors (blind or fan):1380 W
Light bulbs:3000 W
HV halogen lamps:2500 W
Wound transformer:1200 VA
Gira Tronic transformer:1500 W
Fluorescent lamps, uncompensated:1000 VA
Fluorescent lamps, duo-circuit:2300 VA
Fluorescent lamps, parallel-compensated:1160 VA
Mercury-vapour lamps, uncompensated:1000 W
Mercury-vapour lamps, parallel-compensated:1160 W
Connections
KNX:Connection and junction terminal
Load:Screw terminals
Relay
Number:8
Contact:1 x zero-voltage NO contact each
Current capacity
of neighbouring outputs:Total 20 A
Device:Total 80 A
Connections:max. 4 mm²